Emirates near-miss probe identifies data entry error
CANBERRA – An error in the cockpit has been identified by a preliminary report into an incident that saw an Emirates Airbus A340-500 passenger jet suffer substantial damage on March 20 after its tail clipped the runway during take-off from Melbourne Airport
The jet with 257 passengers and 18 crew aboard, heading for Dubai on a scheduled flight, had problems getting off the ground because wrong data had been fed into an onboard computer, according to the Australian Transport Safety Bureau.
The tail of the aircraft struck the runway as the flight crew attempted to get the aircraft off the ground by applying extra thrust.
The Bureau’s director of Aviation Safety Investigation, Julian Walsh, said somebody in the cockpit fed into the computer a weight for the aircraft that was 100 tonnes lighter than its actual weight of 362 tonnes.
That meant that the aircraft computer applied vastly less thrust than was needed for the aircraft to climb safely off the runway.
The takeoff was planned as a reduced-power takeoff and the first officer was the handling pilot for the departure, said the Bureau.
Walsh explained, “During the take-off the captain called for the first officer to rotate (lift-off). The first officer attempted to rotate the aircraft, but it did not respond immediately with a nose-up pitch.
“The captain again called ‘rotate’ and the first officer applied a greater nose-up command. The nose of the aircraft was raised and the tail made contact with the runway surface, but the aircraft did not begin to climb.
“The captain then selected TOGA (maximum thrust) on the thrust levers, the engines responded immediately, and the aircraft commenced a climb.
“The crew notified air traffic control of the tail strike and that they would be returning to Melbourne, dumping fuel prior to landing to reduce the aircraft’s weight.
“While reviewing the aircraft’s performance documentation in preparation for landing, the crew noticed that a take-off weight, which was 100 tonnes below the actual take-off weight of the aircraft, had inadvertently been entered when completing the take-off performance calculation.
“The result of that incorrect take-off weight resulted in a thrust setting and take-off reference speeds that were lower than those required for the actual aircraft weight.”
The aircraft subsequently landed at Melbourne with no reported injuries.
The Bureau noted that the aircraft made contact with the runway at three separate locations, and one of the aircraft tyres clipped navigation and lighting equipment on the ground.
As a result of the accident, Emirates has advised the Australian Transport Safety Bureau that it is reviewing a number of procedures including human factors involved in take-off performance data entry.
The investigation is continuing. The Bureau said a significant amount of work needed to be done before the release of the final report.
.
Ian Jarrett
Have your say Cancel reply
Subscribe/Login to Travel Mole Newsletter
Travel Mole Newsletter is a subscriber only travel trade news publication. If you are receiving this message, simply enter your email address to sign in or register if you are not. In order to display the B2B travel content that meets your business needs, we need to know who are and what are your business needs. ITR is free to our subscribers.
































Qatar Airways offers flexible payment options for European travellers
Airlines suspend Madagascar services following unrest and army revolt
Digital Travel Reporter of the Mirror totally seduced by HotelPlanner AI Travel Agent
Strike action set to cause travel chaos at Brussels airports
All eyes on Qatar as Qatar Airways leads a season of global events